XRF Analyzer model QualiX-2000 Series are widely applied in accurate and non-destructive detection on a variety of precious metal alloys, low alloy steel, stainless steel, tool steel, electronic components, batteries, toys, stationery, children’s products, minerals, raw ore, etc. You can identify material composition and alloy grade.
Applications
XRF Analyzer model QualiX-2000
Overview:
The XRF Analyzer model QualiX-2000 is used in many applications for accurate and non-destructive analysis of virtually any kind of sample including steel and stainless-steel alloys, precious metals and minerals, electronic components, toys, food products, stationery, and much more. It is suitable for use in a lab environment, or on the shop floor or in the field by use of the included shoulder and wrist straps. The QualiX-2000 is ideal for verification of incoming materials, determining the nature of an unknown sample, identifying a particular grade of alloy, or for ensuring that toxic compounds are within allowable limits for specification compliance (e.g. RoHS, NSF, CBCC, etc.).
The analysis is as easy as placing the detector directly against the sample, then depressing and holding the trigger. The built-in 5” touch screen will immediately start to display the elements that are present and their relative mounts as a percentage, with accuracy improving the longer the test is conducted. The unit is also pre-loaded with libraries of common materials and alloys and will identify the material grade if it is contained within the libraries.
The XRF Analyzer model QualiX-2000 series can be supplied in 2 configurations:
- XRF Analyzer model QualiX-2000-A: Alloy Analysis
- XRF Analyzer model QualiX-2000-M: Mineral Analysis
XRF Analyzer model QualiX-2000-A
Alloy Analysis – Specialised for the analysis and detection of elements in pure and alloy metal samples; provides lower detection limits configuration to allow for the detection of minute amounts of alloying elements; well suited to manufacturers, fabricators, welders, or others dealing mainly with metals.
XRF Analyzer model QualiX-2000-M
Mineral Analysis – Specialized for geological analysis of minerals and ores; provides lower detection limits configuration to allow for the detection of trace amounts of minerals and elements
Features/Advantages
XRF Analyzer model QualiX-2000 Optimal Performance
- Provides rapid, non-destructive detection and quickly displays results, often within 2 seconds, and with precision similar to competitive benchtop models.
- Fast analysis of elements between Mg and U on the periodic table (atomic numbers between 12 and 92).
- Note that light elements like Mg and Si are calculated by the built-in software based on the detection of other elements
- Intelligent software simplifies training and operation, allowing the unit to be operated by anyone
- Rechargeable 9000mAh Li battery provides extended battery life of up to 12 hours on a single charge
- Can be used as a benchtop unit when ordered with table stand accessory
XRF Analyzer model QualiX-2000 Simple Operation
- Lightweight and ergonomic design is convenient for use in the lab and in the field, and the heavy-duty travel case ensures safe transport of the instrument.
- “Point & shoot” operation
- 5” high-definition screen with rotational capability for a clear display of results even in low visibility conditions and in areas that are difficult to access directly to analyze.
- Minimal sample preparation required
- Dustproof and weatherproof IP64 classification as defined in IEC 60529
XRF Analyzer model QualiX-2000 Safety and User Protection
- Multiple safety protection features
- Automatic shut-off of X-ray tube when no sample is present to avoid harmful free X-rays
- Thick steel structure with Pb coating prevents leakage of X-rays during operation
- Rubber shield prevents scattering of X-rays from nose of instrument during analysis
- Multi-color warning light system provides the user with information about the status of the instrument.
- Green – Power on/stand-by
- Green (flashing) – Low battery
- Red (flashing) – Performing analysis
- Yellow (flashing) – Trouble/malfunction
- Manual security interlock prevents remote control or shut down of the instrument
XRF Analyzer model QualiX-2000 Advantages
- Portable
- Easy to use
- Point-and-Shoot for sample analysis
Technical Specifications
XRF Analyzer model QualiX-2000 TECHNICAL SPECIFICATIONS
| Analytical Method | Energy dispersive X-ray fluorescence |
| Built-In Computer | CPU: 1G, System memory: 1G, standard 4G mass storage data, extended stored maximum support up to 32G |
| Intelligent Analysis | No need to select test curve, intelligent matching software automatically selects best curve |
| Excitation Source | 50KV/200µA – Ag/Rh end window integrated miniature X-ray tube and high voltage power supply |
| Collimator & Filter | Collimator diameters are 2.0mm and 4.0mm, 6 kinds of filters with automatic switching functions |
| Detector | Silicon drift detector (SDD)
Optional Fast-SDD detector is available, please contact a Qualitest Sales Representative |
| Detector Resolution | Up to 125eV |
| Sample States | Solids, liquids, powders |
| Elemental Range | Atomic numbers between 12 (Mg) and 92 (U) |
| Detection Limit | 1 – 500ppm, depending on element |
| Detection Time | 1 – 60s; results will be displayed within 1 second, duration of test will increase accuracy of results |
| Simultaneous Analysis | Displays up to 40 elements at a time |
| Display Range | ppm – 99.99% |
| Display Screen | 5” transflective LCD touch screen, 1820×720 resolution |
| Video System | 5MP high-resolution camera |
| Connectivity | GPS, Wi-Fi, Bluetooth |
| Data Transmission | Digital multi-channel technology, SPI data transmission; waterproof mini-USB, can be connected to desktop computer to import results |
| Safety | Automatic shutdown of X-ray tube, Pb-lined instrument frame, rubber radiation shield, radiation levels within international safety standards |
| Warning Signals | Green light – Power on/standby
Red light (flashing) – Operating/performing analysis Yellow light (flashing) – Trouble |
| Specialty | Analysis mode can be specialized by application; please contact a Qualitest Sales Representative |
| Power Supply | Rechargeable Li battery, standard 9000mAh, provides up to 12 hours operation on a single charge; 110/220V universal adapter for charging
|
| Temperature | -20ºC to +50ºC |
| Humidity | ≤90% |
| Dimensions | 244mm x 90mm x 330mm (L x W x H) |
| Weight | 1.7 kg |
